Menu Close

Thread locking solution

นํ้ายาล็อคเกลียว ล็อคเกลียว

Threadlocker

Threadlocker work, lock nut, screw, steel pipe, connect pipe
Threadlocker is a kind of anaerobic glue Working under anaerobic conditions, it reacts only on metal surfaces. Used for locking the threads of nuts and screws, steel pipes to prevent loosening of the nut threads. waterproofing and prevent rust Its main chemical is Methacrylate. Threadlockers are liquids that change viscosity if subjected to shaking or shearing (thixotropic properties), allowing good penetration into metal grooves. After inserting into the space will begin to harden Since there is no oxygen in the space between the threads, it can react solidify (Thermosetting) to transform into a solid type. Thermoplastic This allows the thread to be locked and can be used with common hand tools to remove the workpiece. Release the glue to loosen.
 
kafuterthailand offers threadlocker
 
K-0272 กาวล็อคเกลียว
 

High strength threadlocker

K-0272 Threadlocker high strength (industrial adhesive)
high temperature resistant type

Product details

Kafuter Threadlocker 0272 (High Strength) Size 50 ml. Resistant to high temperature 203 ° C
K-0272 High strength and high temperature threadlocker 203°C.
The brand Cafuter is red. Suitable for applications requiring fastening of threads that require high strength and high temperature resistance. Used in industrial and general applications. Contains 50 grams per tube. Products meet RoHS, ISO9001 standards.
***Guaranteed genuine from the factory***

Feature

1. It is an anaerobic glue. It hardens only when it is in anaerobic conditions and in contact with metal.
2. Used for locking threads of metal work that have not been assembled with sizes from M36 down that require high strength.
3. The glue helps to fill the gap in the thread. This results in a high level of strength. prevent loosening from vibration and rust protection It is resistant to water and oil.

How to use

1. Clean the workpiece that needs to be adhered to dry. Free from water and oil
2. Drop some glue on the area to be fixed. Screw the nut onto the thread to be attached.
3. The glue will set in 15-20 minutes and will completely harden within 24 hours.
Use a hot air blower to blow over the thread to be removed. and then use the removal tool.
In case of contact with eyes or touch and allergic Rinse immediately with clean water and consult a doctor. Should be kept away from children.
 

Threadlocker

Threadlocker work, lock nut, screw, steel pipe, connect pipe
 
Threadlocker is a kind of anaerobic glue Working under anaerobic conditions, it reacts only on metal surfaces. Used for locking the threads of nuts and screws, steel pipes to prevent loosening of the nut threads. waterproofing and prevent rust Its main chemical is Methacrylate.
 
 Threadlockers are liquids that change viscosity if subjected to shaking or shearing (thixotropic properties), allowing good penetration into metal grooves. After inserting into the space will begin to harden Since there is no oxygen in the space between the threads, it can react solidify (Thermosetting) to transform into a solid type. 
 
Thermoplastic This allows the thread to be locked and can be used with common hand tools to remove the workpiece. Release the glue to loosen.
kafuterthailand offers threadlocker
 
K-0272 กาวล็อคเกลียว
 

High strength threadlocker

K-0272 Threadlocker high strength (industrial adhesive)
high temperature resistant type
 
Product details
Kafuter Threadlocker 0272 (High Strength) Size 50 ml. Resistant to high temperature 203 ° C
K-0272 High strength and high temperature threadlocker 203°C.
The brand Cafuter is red. Suitable for applications requiring fastening of threads that require high strength and high temperature resistance. Used in industrial and general applications. Contains 50 grams per tube. Products meet RoHS, ISO9001 standards.
***Guaranteed genuine from the factory***
 
feature
1. It is an anaerobic glue. It hardens only when it is in anaerobic conditions and in contact with metal.
2. Used for locking threads of metal work that have not been assembled with sizes from M36 down that require high strength.
3. The glue helps to fill the gap in the thread. This results in a high level of strength. prevent loosening from vibration and rust protection It is resistant to water and oil.
 
How to use
 
1. Clean the workpiece that needs to be adhered to dry. Free from water and oil
2. Drop some glue on the area to be fixed. Screw the nut onto the thread to be attached.
3. The glue will set in 15-20 minutes and will completely harden within 24 hours.
Use a hot air blower to blow over the thread to be removed. and then use the removal tool.
In case of contact with eyes or touch and allergic Rinse immediately with clean water and consult a doctor. Should be kept away from children.
 
 

Threadlocker medium clamping force

K-0242 Threadlocker (Industrial Adhesive) Medium strength
Product details
K-0242 Threadlocker Medium strength, brand Kafuter, the adhesive is blue.
Feature
1. It is an anaerobic glue. It hardens only when in anaerobic conditions and in contact with metal.
2. Used for locking threads of metal work that have not been assembled with sizes from M6-M20 that require moderate strength to loosen.
3. The glue helps to fill the gap in the thread. This results in moderate strength. Prevents loosening from vibration and prevents rust.
4. It is resistant to water and oil.
How to use
1. Clean the work piece that needs to be attached.
2.Apply glue on the thread to be attached.
3. Tighten the nut to the threaded area to be attached.
4. The glue will set in 10 minutes and will set completely within 24 hours.
1. Can use tools to remove
2. Use hot air to blow at the screw attachment area. then use the removal tool
Caution
– In case of contact with eyes or touch and lose Rinse immediately with clean water and consult a doctor.
– Should be kept away from children.
**Products meet ISO9001, RoHs standards**
**Guaranteed genuine from the factory**
Usage example clip
 

Threadlocker medium clamping force

K-0242 Threadlocker (Industrial Adhesive) Medium strength
Product details
K-0242 Threadlocker Medium strength, brand Kafuter, the adhesive is blue.
 
Feature
1. It is an anaerobic glue. It hardens only when in anaerobic conditions and in contact with metal.
2. Used for locking threads of metal work that have not been assembled with sizes from M6-M20 that require moderate strength to loosen.
3. The glue helps to fill the gap in the thread. This results in moderate strength. Prevents loosening from vibration and prevents rust.
4. It is resistant to water and oil.
 
How to use
1. Clean the work piece that needs to be attached.
2.Apply glue on the thread to be attached.
3. Tighten the nut to the threaded area to be attached.
4. The glue will set in 10 minutes and will set completely within 24 hours.
1. Can use tools to remove
2. Use hot air to blow at the screw attachment area. then use the removal tool
 
Caution
– In case of contact with eyes or touch and lose Rinse immediately with clean water and consult a doctor.
 
– Should be kept away from children.
**Products meet ISO9001, RoHs standards**
**Guaranteed genuine from the factory**
Usage example clip
 

K-0222

Threadlocker, low strength
Kafuter K-0222 (Industrial Adhesive)
Threadlocker Low strength, removable anaerobic locking agent, 50 ml.
Product details
Feature:
This product is a single component, medium viscosity, thixotropic and low strength anaerobic threadlocker.
For firmware, the M12 bottom thread is permanently locked and sealed to prevent rusting. Especially for applications requiring easy disassembly without threading. Adjustment of small diameter screws or long threaded fasteners
Packing included:
1 x Kafuter K-0222 Thread Lock
The product meets RoHS, ISO9001 standards, packing size 50 grams per tube.
***Guaranteed genuine products from the factory***
Usage example clip
For more information >> Facebook kafuter thailand
 

K-0222

 
Threadlocker, low strength
Kafuter K-0222 (Industrial Adhesive)
Threadlocker Low strength, removable anaerobic locking agent, 50 ml.
Product details
 
feature:
This product is a single component, medium viscosity, thixotropic and low strength anaerobic threadlocker.
 
For firmware, the M12 bottom thread is permanently locked and sealed to prevent rusting. Especially for applications requiring easy disassembly without threading. Adjustment of small diameter screws or long threaded fasteners
 
Packing included:
1 x Kafuter K-0222 Thread Lock
The product meets RoHS, ISO9001 standards, packing size 50 grams per tube.
***Guaranteed genuine products from the factory***
Usage example clip
For more information >> Facebook kafuter thailand
 
error: เนื้อหาได้รับการคุ้มครอง !! !!