K-907 Transparent Silicone Rubber Adhesive .40g
Usage
Suitable for repairing or bonding silicone-based products such as silicone strips, silicone rubber, or bonding between silicone and metal, glass, stone, etc. It has high adhesion strength, can prevent water and moisture, and withstands hot and cold temperatures from -60 to 200°C.
Specific Properties
- Not rigid | Exterior: Clear
- Initial setting time (25℃, min): ≤ 10
- Tensile strength (mpa): ≥ 1.2
- Elongation at break (%): ≥ 250
- Hardness (Shore A): 20~30
- Shear strength (mpa): ≥ 1.2
- Temperature resistance (℃): -60~200
- Electrical properties:
- Dielectric strength (kV/mm): 15
- Electrical resistance (Ω.cm): ≥ 1.0×10^15
Instructions
- Wipe off dust and clean the surface to be bonded and let it dry.
- Apply the adhesive to the desired area.
- The adhesive will begin to set within 10 minutes and fully cure and be ready for use within 24 hours.
Precautions
- Keep away from children.
- In case of contact with eyes or allergic reaction, rinse with clean water and seek medical attention.
Storage
- After use, close the lid immediately to extend the shelf life.
- Store in a dry place away from sunlight at temperatures between 15~28 ℃.
- Shelf life: 12 months after production.
