K-5915W Electrical coating silicone (100g.)
Usage
Suitable for bonding small electronic equipment components to prevent detachment from assembly points due to vibration. Additionally, it has thermal insulation properties and protects against moisture.
Specific Properties
- Not rigid | Exterior: White
- Density (g/cm^3): 1.3~1.35
- Setting time (25℃, min): 3~10
- Tensile strength (mpa): ≥ 2.0
- Elongation at break (%): ≥ 200~300
- Shear strength (mpa): ≥ 2.0
- Hardness (Shore A): 50~60
- Temperature resistance (℃): -50~250
- Electrical properties:
- Dielectric strength (kV/mm): ≥ 20
- Electrical resistance (Ω.cm): ≥ 2.0×10^15
- Flame retardant: V-0
Instructions
- Clean the surface and remove oil residues.
- Pierce the packaging bottle with a pointed end on the lid.
- Squeeze the adhesive onto the desired surface.
- The adhesive sets within 24 hours at room temperature with 55% humidity.
Precautions
- Increased thickness of the adhesive or higher air humidity will prolong the curing time.
Storage
- Store in a dry place away from sunlight at temperatures ≤ 25℃.
- After use, tightly close the lid to extend the shelf life.
- Remove any adhesive residue around the lid and use the adhesive from the original packaging for subsequent use.
- Shelf life: 12 months after production.
