Menu Close

K-5705 Clear RTV electrical coating silicone

Original price was: ฿120.00.Current price is: ฿118.00.

K-5705 Clear RTV Electrical coating silicone

Feature

It is a ready-to-use glue. insulating glue does not conduct heat It can prevent the shock of the circuit from moisture, dust and water.

 

 

 

Out of stock

K-5705 Clear RTV electrical coating silicone

Usage

Coating adhesive onto the surface of printed circuit boards (PCBs). The adhesive has a clear color, allowing for easy visibility of the circuit board. It does not corrode and is free from contaminants.

Specific Properties

  • Not rigid | Exterior: Clear
  • Initial setting time (25℃, min): ≤ 10
  • Full curing time (Hour): 24

Physical Properties

  • Elongation at break (%): ≥ 150
  • Hardness (Shore A): 30~40
  • Shear strength (mpa): ≥ 1.0
  • Temperature resistance (℃): -60~250

Electrical Properties

  • Dielectric strength (kV/mm): 16
  • Electrical field resistance (at 60 Hz): 2.96
  • Volume resistivity (Ω.cm): ≥ 2×10^15

Instructions

  1. Clean the parts that need to be coated, then apply the adhesive to the desired area.
  2. Parts that have been coated should be left at room temperature for 24 hours before use.

Precautions

  • Keep out of reach of children.
  • In case of contact with eyes or allergic reaction, rinse with clean water and seek medical attention.

Storage

  • Store in a dry place away from sunlight at temperatures ≤ 25 ℃.
  • Shelf life: 12 months after production.
type of project you are working on

PCB

You may also like…

error: เนื้อหาได้รับการคุ้มครอง !! !!