K-5704 Electrical Silicone Adhesive ( white )
Usage
- Used for electrical components, electronics, and semi-conductive materials. The adhesive helps secure electronic devices from vibration and prevents short circuits from nearby electrical devices. It also protects components from moisture.
Specific Characteristics
- Non-rigid | Exterior Appearance: Hazy White/Black
- Setting Time (25℃, min): ≤10
- Full Curing Time (Hour): 24
Rigidity | Physical Properties
- Tensile Strength (mpa): ≥ 1
- Elongation at Break (%): ≥ 150
- Shear Strength (mpa): ≥ 0.8
- Peel Strength (mpa): ≥ 1.5
- Hardness (Shore A): 30~40
- Temperature Stability (℃): -50~250
Electrical Properties
- Dielectric Strength (kV/mm): ≥ 15
- Dielectric Constant (100KHz): ≤ 3
- Volume Resistivity (Ω.cm): ≥ 1.0×10^14
Instructions
- Clean the surface and remove any oil residue where adhesion is required.
- After bonding the components, leave them at room temperature for 24 hours before use.
Precautions
- If used on a large surface area, it may affect the setting time of the adhesive.
- Once the adhesive has fully cured, the silicone will adhere tightly immediately.
- If there is any residue left in the area where the adhesive is applied, it should be removed.
- In case of eye contact or skin irritation, rinse with clean water and seek medical attention.
Storage
- Store in a dry place away from sunlight at temperatures ranging from 15~28℃.
- Shelf life is 12 months after production.
