K-0222 Threadlocker (Industrial Adhesive)
Low-strength threadlocker, oxygen-free removable threadlocker, 50 ML size.
Product Details
Features
This product is a single-component, medium-viscosity adhesive threadlocker with low strength. It is used for locking and sealing fasteners permanently to prevent corrosion, especially useful for applications requiring easy disassembly without affecting the thread size or long bolt holding.
Usage
Used for locking metal fasteners of size M12 and below that require strength. The adhesive fills gaps in the threads, providing strength, preventing loosening from vibration, and protecting against corrosion.
For water and oil.
Specific Features
Non-hardening | Main Material: Methacrylic acid
Appearance: Purple
Viscosity (mpa.s): 10005000
Density (g/cm^3): 1.05
Flash Point (℃): > 108
Maximum Gap (mm): 0.13
Setting Time (25℃, min): ≤ 20
Hardening | Full Cure Time (25℃, Hour): 24
Torque Breakaway (N.m): 312
Torque Shear Strength (N.m): 210
Temperature Stability (℃): -54149
Instructions
Clean the surface to be bonded.
Apply the adhesive to the area to be bonded, ensuring full coverage.
For best results, apply approximately 0.5 milliliters of adhesive.
Tighten the nut into the area to be bonded.
The adhesive sets in 15 minutes and fully cures within 24 hours.
Warnings
When used on larger surfaces, the setting time of the adhesive may be affected, reducing the strength.
Not suitable for use on plastic surfaces.
In case of eye or skin contact or allergic reaction, wash with clean water and seek medical attention.
Storage
Store in a dry place away from sunlight at temperatures between 15~28℃.
Shelf life is 12 months from the date of manufacture.
