Menu Close
K-5705 ซิลิโคนเคลือบบอร์ด PCB

K-5705

K-5705 PCB Clear RTV Electrical Coating Silicone

Feature

It is a ready-made, ready-to-use adhesive. The adhesive is insulating. Does not conduct heat
Can prevent circuit shock from moisture, dust and water.

Usage

Coating the adhesive onto the surface of the printed circuit board (PCB). The adhesive is clear in color.
Makes it easy to see the circuit board. It is non-corrosive and has no pollution during use.

Specifications

Does not harden | Appearance: clear color
Initial setting time (25℃,min) : ≤ 10
Hardening | Physical properties | Deformation point (%) : ≥ 150
Rubber hardness (Shore A) : 30~40
Shear strength that can be tolerated (mpa): ≥ 1.0
Stable temperature (℃) : -60~250
Electrical properties | Dielectric bond strength (kV/mm) : 16
Electric field resistance (at 60 Hz) : 2.96
Area resistance value (Ω.cm) : ≥ 2×1015

How to use

Clean the workpiece to be coated and then apply glue to the affected areas.
want to coat
Coated parts should be placed at normal room temperature for 24 hours before use.

Caution

Should be kept away from children.
In case of contact with eyes or allergic reaction Rinse with clean water and see a doctor.
฿90.00
error: เนื้อหาได้รับการคุ้มครอง !! !!