Menu Close

ELECTRONICS

FOR THE ELECTRONIC SECTOR

K-5704  silicone sealant fixing electronic devices ( white )

is silicone glue has thermal conductivity to lower the temperature
Used in the assembly of LED lamps with PCB, aluminum, etc., firmly attached.
resistant to temperature changes
The operating temperature is -50℃ ~200°C.
Electrical Properties < 3.0
Set time 10 minutes
Hardness 30~40

K-5704B silicone sealant fixing electronic devices ( black )

is silicone glue has thermal conductivity to lower the temperature
Used in the assembly of LED lamps with PCB, aluminum, etc., firmly attached.
resistant to temperature changes
The operating temperature is -50℃ ~200°C.
Electrical Properties < 3.0
Set time 10 minutes
Hardness 30~40

K-5705 Silicone Coated PCB

insulating glue does not conduct heat Can prevent short circuit of the circuit from moisture.
dust and water by coating the adhesive to the surface of the circuit board (PCB).
The glue is clear. This makes the circuit board easy to see.
Non-corrosive and no pollution to use.
The operating temperature is -60℃ ~250°C.
Set time 10 minutes
Easy disassembly
Hardness 30~40

K-5204K Thermal Conductive Silicone

It has a heat conduction feature to reduce the temperature. used in assembly
LED bulbs with PCB, aluminum, etc. are firmly attached, resistant to
temperature change
The operating temperature is -60℃~280°C.
Elongation value ≥100
Set-up time 10 minutes
Hardness 50~65

K-201G Fixing Adhesive and Small Screws (Red)

Has flexible properties, helps to stick to prevent bumps.
Used for mounting electronic devices.
to help the device mobile electronics
from the assembled point or the point that needs to be locked
Viscosity 2000~3000 mpa.s
Set-up time 5 minutes
Withstanding torque ≤ 9.8 N.m

K-5915W Silicone Coated PCB (White)

It has insulating properties, meets UL94 V-0 standards.
Used for fixing electronic devices. semiconductor
Non-corrosive, non-polluting to use The glue will set
Completed within 24 hours at room temperature 25 °C.
The operating temperature is -50℃ ~250°C.
Heat resistant to standard V-0
Hardness 50~60
Tensile strength ≥ 2.0 mpa

K-5312L Silicone Coated PCB Type AB ( White )

It is a silicone sealant to coat electronic circuit boards, type AB.
It is used for coating printed circuit boards (PCBs) with insulating properties.
low viscosity weather resistant can prevent moisture
Non-corrosive, the glue will set completely within 10-24 hours.
at room temperature 25°C
Resistant to hot and cold temperatures
Complete set in 24 hours
Hardness 10~20
Viscosity 1500~3500 mpa.s

K-5312W Silicone Coated PCB Type AB ( Black )

It is a silicone sealant to coat electronic circuit boards, type AB.
It is used for coating printed circuit boards (PCBs) with insulating properties.
low viscosity weather resistant can prevent moisture
Non-corrosive, the glue will set completely within 10-24 hours.
at room temperature 25°C
Resistant to hot and cold temperatures
Complete set in 24 hours
Hardness 10~20
Viscosity 1500~3500 mpa.s

K-9741 Epoxy glue for PCB coating type AB

is epoxy Electronic circuit board coating type AB
have insulating properties low viscosity weather resistant
that has been modified for hot, cold, and moisture protection
Printed circuit board (PCB) coated, non-corrosive, no pollution to use.
Operating temperature -30~100°C
Hardness >80
Shear strength >10 MPa
Complete set in 24 hours

K-704N Moisture-proof Silicone for Electronics

is silicone glue insulating glue does not conduct heat
Used to attach electronic devices or turn off the motor
electrical equipment and others can prevent moisture from
water droplets in the air
Operating temperature -60℃ ~200°C
Set-up time 25 minutes
Hardness 20~40
Elongation value ≥ 300

.

error: เนื้อหาได้รับการคุ้มครอง !! !!