Anaerobic Glue (กาวอับอาศ)
Anaerobic Glue, also known as Anaerobic Glue, is a single component sealant made on the principle of oxygen inhibition against free radicals that can be used for bonding and sealing. When the rubber surface is separated from the air and the catalyst, it can quickly polymerize at room temperature. The composition of anaerobic adhesives is quite complex, and unsaturated monomers are the main component, and also contain aromatic amines, aromatic phenols, hydrazines and peroxides. In recent years, foreign anaerobic adhesive formulas have been continuously improved and completely improved by the machinery industry, and there are many industries that need to use this reagent, such as aerospace, automotive, mechanical, electronic, electrical and so on.
But all of them have the same main chemical that this type of adhesive can react with depends on two factors:
Must be in a very narrow, small space without oxygen.
Must be on a metal surface only to be able to react.
physical properties
It is a liquid after the reaction. will turn into a solid Thermosetting
For use with metal workpieces only.
The glue will not harden if exposed to air. So it works well in the strait.
It’s an anaerobic glue. It hardens only when it is in anaerobic conditions and in contact with metal.
Used for thread locking of unassembled metal work of various sizes that require high strength.
The glue helps to fill the gap in the thread. This results in a high level of strength. Prevents loosening from vibration and prevents rust. It is resistant to water and oil.
Applications
Lock nut
Stud lot
Assemble the gear to the shaft.
Assemble the bearings with the housing.
Assemble any cylindrical metal surface.
Can be used for locking, bonding, sealing, fixing shaft, cylindrical surface assembly and solid cast iron flange assembly.
Benefits of Anaerobic Glue
Use instead of locking ring nylon lock to lock the thread. If glue is utilized in this field, it is called Threadlocker
Used instead of threaded tape or PTFE tape to seal the threads, prevent leaks, waterproofing and airtightness. If it is used in this field, it is called Thread Sealant
Used to bond metal. Assembling the metal into one piece, this anaerobic adhesive is designed to withstand high shear loads. and is often called shaft fixing agent
how to use
Clean the workpiece that needs to be adhered to dry. Free from water and oil
Drop some glue on the area to be fixed. Screw the nut onto the thread to be attached.
The glue will set in 15-20 minutes and will completely harden within 24 hours.
how to remove
Use a hot air blower to blow over the thread to be removed. then use a tool to remove
Caution
In case of contact with eyes or touch and allergic Rinse immediately with clean water and seek medical advice. Keep it away from children.
For anyone who is interested “Anaerobic Glue, Threadlocker, Thread Sealant, Shaft Fixer” for various applications can be purchased as appropriate according to the application. For more information Chat to talk to kafuter at the KAFUTERTHAILAND page .
Anaerobic Glue (กาวอับอาศ)
Anaerobic Glue, also known as Anaerobic Glue, is a single component sealant made on the principle of oxygen inhibition against free radicals that can be used for bonding and sealing. When the rubber surface is separated from the air and the catalyst, it can quickly polymerize at room temperature. The composition of anaerobic adhesives is quite complex, and unsaturated monomers are the main component, and also contain aromatic amines, aromatic phenols, hydrazines and peroxides. In recent years, foreign anaerobic adhesive formulas have been continuously improved and completely improved by the machinery industry, and there are many industries that need to use this reagent, such as aerospace, automotive, mechanical, electronic, electrical and so on.
But all of them have the same main chemical that this type of adhesive can react with depends on two factors:
Must be in a very narrow, small space without oxygen.
Must be on a metal surface only to be able to react.
physical properties
It is a liquid after the reaction. will turn into a solid Thermosetting
For use with metal workpieces only.
The glue will not harden if exposed to air. So it works well in the strait.
It’s an anaerobic glue. It hardens only when it is in anaerobic conditions and in contact with metal.
Used for thread locking of unassembled metal work of various sizes that require high strength.
The glue helps to fill the gap in the thread. This results in a high level of strength. Prevents loosening from vibration and prevents rust. It is resistant to water and oil.
Applications
Lock nut
Stud lot
Assemble the gear to the shaft.
Assemble the bearings with the housing.
Assemble any cylindrical metal surface.
Can be used for locking, bonding, sealing, fixing shaft, cylindrical surface assembly and solid cast iron flange assembly.
Benefits of Anaerobic Glue
Use instead of locking ring nylon lock to lock the thread. If glue is utilized in this field, it is called Threadlocker
Used instead of threaded tape or PTFE tape to seal the threads, prevent leaks, waterproofing and airtightness. If it is used in this field, it is called Thread Sealant
Used to bond metal. Assembling the metal into one piece, this anaerobic adhesive is designed to withstand high shear loads. and is often called shaft fixing agent
how to use
Clean the workpiece that needs to be adhered to dry. Free from water and oil
Drop some glue on the area to be fixed. Screw the nut onto the thread to be attached.
The glue will set in 15-20 minutes and will completely harden within 24 hours.
